Performance Modifications

Special Deal on In Stock Items Only.

Ford 302 Eagle 4340 Forged Steel Crank for a 331 Stroker Engine. New in the Box.

Shipping cost is figured to your location. This Crank uses 2.100 Rod Journals. UPDATE!!!  The Price of this Cranshaft has been Reduced by $100.00 and  SHIPPING IS FREE!!! ON THIS CRANK IF PURCHASED BEFORE OCTOBER 31st.

Better than Mail Order!!! This Crank is Priced Below Mail Order Prices. Get a Quality Crank and a Better Price Here!! I have a New in The Box Scat 4340 Forged Crank for a Big Block Chevy 454. The Stroke is 4.250 &  will produce 496 Cubic inches with a .060 overbored 454 or 427 Block. With a 502 Block you can go as high as 540 cubic inches. Additional Shipping Charges may apply to areas and other areas may get a discount depending on Shipping address.

We are a Moser Engineering Dealer. Moser Engineering has all the Rear End Parts you need for your Classic Car, a Pro Street Hot Muscle Car, your Drag Race and other type of Race Car, and about all the parts for Rear Ends. They have Custom Bolt in Housings in, Nine inch Ford, 12 Bolt Chevy, and Dana 60. Contact us today for Axles, Gears, Posi Units, Spools, Brake Kits, and Complete Housings and Housing Kits.

Moser 33 Spline 5 Lug Axles, C-Clip Eliminators, 3 inch Axle Studs with an Extra Bolt Pattern for Chevy Wheels, Full 33 Spline Spool for Ford 8.8 Rears.

We offer All Major Brands of Street & Race Heads. Air Flow Dynamics, Air Flow Research, Brodix, Dart, Edelbrock,GM Bowtie, Ford Racing, Roush, Yates, Pro Comp, Patriot Performance, World Products. If you don't see what you want listed please call.  We have Street Strip Small Block Ford & Chevy Aluminum Heads as Low as $659.97 a pair bare & Fully Assembled to your Cam Specs Street Sets as Low as $895.00 a set, plus Complete Assemblies for All Out Competition. You just can't afford not to run a New Set of Aluminum Heads when it Cost More to Rebuild Stock 30 or 40 year old Iron Heads.

Air Flow Dynamics Aluminum Heads for 351 Cleveland and other Small Block Fords.
Heads are available for 2V - 4VS for Street - 4VR for Race. Price from $1,600. Bare $2,250 Complete for Street, $2,500 up for Race with Solid Flat Tappet Cams to .650 Lift,  More for Solid Roller Cams. 
R Heads have 245 CC Intake Runners and Flow about 358 CFM @ .700 lift. 
The Intake is $700.00 for the 2V, 4VS, or 4VR.

 

 

Small Block Ford & Chevy Pro Comp Head Castings with our own HD SS Valves and Springs. This set up is perfect for the Street Strip Guy. We Assemble them to your Cam Specs for Proper Spring Pressure. These are complete assembled heads for Flat Tappet & Hyd Roller Cams up to .600 inches of Lift and are ready for a final wipe down & install for only, $899.97 for the pair. Don't be confused by the Hype. These Castings have proven to be good & with our Valves and Springs Kit will take care of Business.

We carry and handle most all products for the Performance Minded, Please inquire about any Product that might interest you.

Lebra by Saddleman. Two Piece Bra for a 1968 to 1978 VW Beetle. Discounted price,  only, $55.0o and FreeShipping.

Milodon Bolt on Oil Pump Pick-up  Tubes. No longer will you need to Weld the Pick Up on to the Oil Pump. Simply install Tube in Housing and Bolt the bracket to the Pump Cover using existing Housing Cover Bolts.

These Pick Ups are a Hi Flow design with CNC Machined Billet Pump Inlets. 

 Small Block Chevy for Standard or Hi Volume Pumps for Milodon Pans 31502 or 31503. Only $37.95

Carter Hi Performance Mechanical Fuel Pumps for Muscle Cars and Race Cars. From $29.97  The pump pictured below has a #10 AN Type of Inlet Fitting & is a Drag Race Strip Pump. It Sells for $119.97. Mail Order is approx, $129.95

Small Block Chevy, Big Block Chevy Mark IV Engines, Gen V & Gen VI, plus Small & Big Block Ford Timing Cover Gasket Sets. Priced from only, $9.97 and up. Most kits contain, Quality Material Timing Cover Gasket, Front Cover Seal, Water Pump and Fuel Pump Gaskets. Kit contents vary per engine.

Copper Spark Plug Indexing Washers, 30 per pack. As low as $19.97 a pack for Flat Washers and $29.97 for a Pack of 30 Tapered Washers.

Competition Cams - Cams and Cam & Lifter Kits - Pushrods - Springs - Locks & Retainers

We offer Complete Engine Machining and Building of Stock Classic Car and Muscle Car Engines as well as Custom Stroker Engines and Race Engines. Got a Rusty Block, we can have it Looking Like New with a Wheel Abrator Service. Give us a Call Today.

Big Block Chevy Bolt On Oil Pump Screen Part Number, 18302.

These Pickups are for Std and Hi Volume Oil Pumps and Oil Pans that are 7 1/2 to 7 3/4 inches deep.

These Pickups are a Hi Flow Design with CNC Machined Billet Pump Inlets.

I have some left over and unused Nascar Exhaust parts. X pipes, S pipes and more. Call for your needs. As low as $25.00 per piece for 6 inch to 12 inch Tips. More for X pipes and S pipes.